No products
7.5 kW
- Transport fans
- Cyclones
- Filtration stations (filters)
- Cellular locks (cellular dispensers)
- Sawdust and shavings station extractions
- Pipes
- Coupling ties for pipes
- Pipe suspension clamps
- Rings (flanges) in bulk
- Polyurethane flexible hoses
- Stubs (pipe-to-hose connectors)
- Flexible hose clamps
- Knees (Arches)
- Tees
- Reductions
- Block catchers (grippers)
- Gate valves
- Manifolds
- Other fittings and accessories
- Welding fume extraction
- Fans for dusty or clean air
7.5 kW
There are 12 products.-
Transport fan of 7.5 kW in standard design. Massive design, proven over the years, resistant to industrial working conditions. Motor efficiency class: IE3 (Premium Efficiency).
5 670,30 zł brutto
4 610,00 zł netto
In Stock -
Transport fan of 7.5 kW in standard design, in a universal housing. The universal housing allows the fan to be mounted in any outlet orientation. Motor efficiency class: IE3 (Premium Efficiency).
5 953,82 zł brutto
4 840,50 zł netto
Available on request. -
Transport fan of 7.5 kW in PO design. Motor efficiency class: IE3 (Premium Efficiency). Execution PO is characterized by additional sealing on the impeller hub, preventing the penetration of steam from the pumped medium to the motor bearing.
6 275,46 zł brutto
5 102,00 zł netto
Available on request -
Transport fan with a capacity of 7.5 kW. Fans of the WC variety compared to standard WMT fans are characterized by increased pressure at the expense of lower efficiency. They are used in the transportation of granulates and plastic milling in companies engaged in recycling of plastics. The fan typically transports up to 1500 kg of material per hour.
6 520,85 zł brutto
5 301,50 zł netto
Available on request. -
Transport fan of 7.5 kW in H design. Motor efficiency class: IE3 (Premium Efficiency). Execution H is characterized by: housing spiral made of wear-resistant HARDOX® sheet metal, rotor blade pads made of wear-resistant HARDOX® sheet metal.
6 568,82 zł brutto
5 340,50 zł netto
Available on request. -
Fans of the WC variety are used in the transportation of granulates and plastic milling in plastic recycling companies. The fan typically transports up to 1500 kg of material per hour. Version PO is characterized by additional sealing on the rotor hub, preventing the penetration of steam from the pumped medium to the motor bearing.
6 880,25 zł brutto
5 593,70 zł netto
Available on request. -
Transport fan with a power of 7.5 kW. Fans of the WC variety are usually used in the transportation of granulates and plastic milling. The fan typically transports up to 1500 kg of material per hour. Execution H is characterized by: housing spiral made of wear-resistant HARDOX® sheet, impeller blade pads made of wear-resistant HARDOX® sheet metal.
7 419,36 zł brutto
6 032,00 zł netto
Available on request. -
7.5 kW explosion-proof transport fan. Motor efficiency class: IE3 (Premium Efficiency).
7 441,50 zł brutto
6 050,00 zł netto
Lead time: approximately 4 days -
Transport fan of 7.5 kW in PTO execution. PTO execution is characterized by: an additional seal on the rotor hub, preventing steam from the pumped medium from reaching the motor bearing, a heat ejector, located on the extended rotor hub, allowing pumping of a medium of higher temperature (up to 120oC).
7 986,39 zł brutto
6 493,00 zł netto
Available on request -
Explosion-proof fan WMTX-7 WC cn
Transport fan of 7.5 kW in explosion-proof execution. Fans in the WC variety compared to standard WMT fans are characterized by increased pressure at the expense of lower efficiency. The fan typically transports up to 1500 kg of material per hour.
8 364,00 zł brutto
6 800,00 zł netto
Available on request. -
Fan WMST-7 (for elevated temperatures)
Transport fan of 7.5 kW in the version with a clutch drive. Special variants (hard-wearing, high-pressure, stainless steel) are available on request. Motor efficiency class: IE3 (Premium Efficiency).
8 745,30 zł brutto
7 110,00 zł netto
Lead time: approximately 4 business days -
Fan WMT-7 PO - stainless steel execution
Transport fan of 7.5 kW in PO design with working elements made of stainless steel. The impeller, casing working elements, inlet and outlet adapter are made of stainless steel. The electric motor, motor base and external finned elements are made of standard materials. The fan is powder-coated on external surfaces.
12 177,00 zł brutto
9 900,00 zł netto
Available on request
